2013 Chevrolet Silverado 1500
Mileage
88,662
Service Date
8/30/2019
Services Performed
- Check Brake operation ,( Remove all four wheels , check all pad linings , check hydraulic operation of system , check all contact surfaces
- CHANGE ENGINE OIL AND FILTER ( Check all fluid levels , set tire pressures to spec , check all belts and hoses , inspect charging starting components )
- CLEAN AND ADJUST REAR BRAKES AS NEEDED
- DISC ROTOR – Remove and Replace – Front,Both – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing. Includes: Replace Pads (if necessary). DOES NOT include refinishing.]
- WHEEL BEARING – Remove and Replace – 4WD Front,One Side – [Includes: Repack and adjust Bearings (where applicable). Includes: Replace Inner and/or Outer Bearings, Cups, Seals and repack (where applicable).]
- EVAP EMISSION CONTROL SYSTEM – INSPECT – [Check all fuel and vapor lines and hoses for proper hook-up, routing, and condition. Check that the purge valve, if the vehicle has one, works properly. Replace as needed.] AIR CLEANER/ELEMENT – REPLACE – [Replace every 45000 miles or every 48 months, which ever comes first.] AUTOMATIC TRANSMISSION FILTER – REPLACE – [Replace filter when vehicle is driven under any of these conditions: Mainly driven in heavy city traffic in hot weather. Mainly driven in hilly or mountainous terrain. Frequently towing a trailer. Used for high speed or competitive driving. Used for taxi, police, or delivery service.] AUTOMATIC TRANSMISSION FLUID – REPLACE – [Replace fluid when vehicle is driven under any of these conditions: Mainly driven in heavy city traffic in hot weather. Mainly driven in hilly or mountainous terrain. Frequently towing a trailer. Used for high speed or competitive driving. Used for taxi, police, or delivery service.] ENGINE OIL and FILTER – REPLACE – [It is possible that, if you are driving under the best conditions, the engine oil life system may not indicate that vehicle service is necessary for over a year. However, the engine oil and filter must be changed at least once a year and at this time the system must be reset.] TRANSFER CASE FLUID – REPLACE – [Replace fluid when vehicle is driven under any of these conditions: Mainly driven in heavy city traffic in hot weather. Mainly driven in hilly or mountainous terrain. Frequently towing a trailer. Used for high speed or competitive driving. Used for taxi, police, or delivery service. For vehicles mainly driven off-road in four-wheel drive or used in farming, mining, forestry, Department of Natural Resources (DNR), or snow plowing Do not directly power wash the transfer case output seals. High pressure water can overcome the seals and contaminate the transfer case fluid. Contaminated fluid will decrease the life of the transfer case and should be replaced.] OIL LIFE MONITOR – RESET – [Reset the system at every oil and filter change. If the system is ever reset accidentally, the oil must be changed at 3000 miles since the last oil change To reset the Engine Oil Life System: Turn the ignition to ON/RUN with the engine off. Press the DIC menu button on the turn signal lever to enter the Vehicle Information Menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE. Press the SET/CLR button to reset the oil life at 100%. Turn the ignition to LOCK/OFF. The system is reset when the CHANGE ENGINE OIL SOON message is off and the REMAINING OIL LIFE 100% message is displayed. If the CHANGE ENGINE OIL message comes back on when the vehicle is started, the engine oil life system has not been reset. Repeat the procedure.] TIRES – ROTATE – [Tires should be rotated every 7500 miles. Check tire pressure, damage and tread depth.]
LOWELL H. gave our service a 5 star review on 8/31/2019
